For over 40 years, Quelfire has been one of
the leading manufacturers and suppliers of specialist passive fire protection
for buildings. The company has built its name on a long-standing commitment to
high-quality certified products, including fire containment systems for pipe,
duct and electrical service penetrations, as well as linear joints and cavity
barriers. As part of its offering, Quelfire provides a range of valuable
products and services to specifiers, architects, engineers and contractors.
The company’s core QuelStop Firestopping
System, a ‘one-stop-shop’ aimed at specialist firestopping contractors, will be
on display at the exhibition. The Firestopping System comprises QuelStop Fire
Batt, QuelStop CE-marked Intumescent Acrylic Sealant, QF2 Fire Protection
Compound, QuelStop HPE Intumescent Graphite Sealant and QuelCoil Continuous
Intuwrap, an ideal overall solution for firestopping mechanical and electrical
service penetrations. The Firestopping System is also compatible with other
Quelfire products such as fire collars and sleeves.
Recent trends show that there is an
increased need to use cast in fires collars, and visitors to the stand will be
able to learn more about the Quelcast Cast in Fire Collar, including the benefits
of the concept and how to correctly install it. The Quelcast Cast in Fire
Collars prevent the spread of fire through plastic pipes and cables where they
penetrate concrete floors and offer up to four hours fire rating. Tested to BS
EN 136603:2009 and carrying CE marked certification, the fire collars are
suitable with a wide range of pipe types and sizes, as well as cables.
All of Quelfire’s high-quality products are
manufactured in the UK and have undergone rigorous testing to the latest BS and
EN standards. With a commitment to not only testing and developing new products
and systems that push the benchmark for passive fire safety, the company also
prides itself on providing full technical back-up and support to all parties
involved from design through to installation, to ensure the compliance of the
design and performance of the installation.
We have a wealth of experience in serving
architects, specifiers, main contractors, engineers and firestopping
contractors with a great understanding of the requirements and challenges at
the stage of the construction projects each of them are involved in. By
visiting our stand at FIREX, not only can visitors learn more about the
technical details of our wide range of innovative solutions, but also about the
wide range of expertise we use to support different parties involved in the
passive fire protection of buildings at all stages of construction projects.
Quelfire Limited
Website
Email Us
T: 0161 924 1342
Springvale Industrial Estate
Millbuck Way
CW11 3HT
Sandbach, Cheshire
United Kingdom
Quelfire Limited where at stand FI.1237 on the 16-18 May 2023 at the ExCeL London where the co-located IFSEC, FIREX, Facilities Show and Safety & Health Expo events took place!
QuelStop HPE Intumescent Graphite Sealant is a high expansion intumescent acrylic based graphite sealant used to provide a fire rated linear joint or gap seal and to maintain the fire rating of walls and floors where they have been penetrated by services. It provides up to 4 hour fire rating (EI240). It is...
QuelStop CE Marked Intumescent Acrylic Sealant is a water-based intumescent acrylic used to provide a fire rated linear joint or gap seal and to maintain the fire rating of walls and floors where they have been penetrated by services. It provides up to 4 hour fire rating (EI240). It is suitable: for u...
QuelStop Fire Batt is a coated mineral wool board used to reinstate the fire rating of wall and floor constructions where they have been penetrated by services. It provides up to 2 hour fire rating, is suitable for use in flexible walls, rigid walls and floors, as well as for use around cables, cable bunch...
QuelCoil Continuous Intuwrap is used to maintain the fire rating of walls where they have been penetrated by plastic pipes and/or metallic pipes with combustible insulation. It provides up to 2 hour fire rating (EI120). Supplied in a 25m coil and cut to length on site. No mechanical fixings required. Suita...
Quelfire QF2 Fire Protection Compound is intended for use as a gap filling material where cables, ducts or pipework services penetrate fire compartment floors and walls. QF2 expands slightly on curing (1%), to form a rigid smoke and gas tight seal and is also suitable for use in load bearing situations. Su...
Quelfire QWR CE Marked Pipe Collars prevent the spread of fire through PVC, HDPE & PP pipes where they penetrate firecompartment walls and floors. They have been tested to BSEN 1366-3: 2009, they are CE Marked and provide up to 4 hour fire rating. They are suitable for PVC, PVC-U, PE, HDPE, M...
QRS CE Marked Intumescent Fire Sleeve for Plastic Vent DuctsQuelfire QRS CE Marked Intumescent Vent Duct Fire Sleeves prevent the spread of fire where plastic pipes or plastic ducts penetrate fire compartment walls. They are CE Marked, tested to BSEN 1366-3: 2009 and with Uncapped/Uncapped (U/U) duct confi...
Quelfire QWW CE Marked Intuwraps prevent the spread of fire through PVC, HDPE & PP pipes where they penetrate fire compartment floors. They are tested to BSEN 1366-3: 2009, are CE Marked and provide up to 4 hour fire rating. They are suitable for PVC, PVC-U, PE, HDPE, MDPE, PP & ABS pipes, are avai...
Quelfire Intumescent & Acoustic Putty Pads are designed to maintain fire resistance of plasterboard partitions where plastic or metal electric socket boxes penetrate them. They also make a significant contribution to the reduction of air leakage in properties, helping reduce energy costs and carbon emi...
Create a business listing on the UK's leading security and fire directory
The latest security and fire news, trends and insights
Thanks for using IFSEC Global Directory,
Your enquiry has been sent to the selected companies, they will be in contact shortly.