Protecta® FR Coating spray grade, is an ablative
sealant coating designed to enhance, seal and fire protect mineral fibres. It
is based on a durable polymer system with inert fillers, non-halogenated fire
retardants and a preservative to resist microbial attack.
Protecta® FR Coating is designed to be applied via spraying directly
onto mineral fibres. The coating dries to give a sound, flexible white surface
finish. During installation of mineral fibres, the cured seal- ant coating
reduces de-lamination and increases surface stability for adhesive and fixing
sealant application.
The ablative property of the coating resists
flame spread and protects
the mineral fibres against fire penetration by significantly reducing the
permeability of the mineral fibre core and prevents the passage of hot gases,
thus reducing the temperature rise on the unexposed side and reducing heat
conduction through the building services.
Mineral fibres coated with Protecta®
FR Coating are designed to prevent the spread of fire and smoke through
openings in fire rated walls and floors,
also where openings are formed to allow the installation of multiple building
services. The system will also maintain the acoustic design performance.
PROPERTIES & PRECAUTIONS
• The coating applied on mineral fibres
is classified for all types of constructions
with or without
building service penetrations.
• Simple and very quick to install.
• Easy
to retrofit additional
building services after installation.
• Permanently flexible - will accommodate movements
during fire and smaller movements in the construction it has been fitted within.
• Suitable for most surfaces, including
concrete, bricks, masonry, steel, wood, gypsum, glass, plastics and most
non-porous surfaces.
• May be used in unlimited lengths in
walls with heights up to 1200 mm and
in floors with widths up to 120 mm.
• May be installed in gypsum walls
without framing around the open-
ing.
• Halogen free with added fungicides.
• Once
fully cured, the coated board resists water and frost.
• The fire performance specification of
the coating has been derived when the seal has been let to cure for a month.
• Precautions are required to be taken
to prevent a person stepping onto a blank horizontal
penetration seal.
• On
site, the coating
must be used together with Protecta® FR Acrylic
when sealing around building services.
• The
coating is not intended for application on bituminous substrates or substrates that can extrude certain
oils and plasticizers or solvents.
• The
coating is not recommended for use in submerged joints
or areas exposed to high abrasion.
• The coating should not come into
contact with food or medical applications.
15
St Andrews Road
HD1 6SB
Huddersfield, West Yorkshire
United Kingdom
Protecta Interior Paint FR-1 is a decorative paint with special properties to protect against spread of fire and protect people's health against harmful chemicals. It is a hard-wearing interior acrylic paint, formulated to the highest specification and offering unsurpassed intensity of colour.
All colour...
Protecta EX Mortar is a dry white powder which consists of inorganic components and perlite. When water is added, a hardened thermal fire sealing compound for sealing through-penetrations that penetrate fire classified walls and floors. The mortar expands approximately 1% during hardening and thus secure...
Protecta® FR Acrylic has been tested with various types of penetrations through walls, ceilings and floor constructions. Its intumescent property closes any gaps left by burnt away penetrations and will also maintain the acoustic design performance in walls and floors.
Protecta® FR ...
Protecta® FR Graphite is a waterbased, fire classified sealing
compound which contains a high concentration of heat expanding graphite
material. It also has a shelf life of 18 months.
Protecta® FR Graphite is a high specification formulation designed
to prevent the spread of fire, smoke and ...
Protecta® FR IPT is a high performance, professional quality, one part ready to use sealant and adhesive. Based on an innovative new Inert Polymer Technology it is suitable for a wide variety of building trade applications including d ecorating, flooring, joinery, plumbing and tiling and out-performs conve...
Protecta® FR Foam is
a fire rated construction foam with good acoustic properties. Designed to
maintain the fire resistance in walls and floors by filling linear gaps.
Protecta® FR Foam is
supplied as a single component polyurethane foam which cures by moisture
absorption. It has excellent ...
Protecta® Fire Dampers are used to fireproof ventilation ducts penetrations in fire cell limiting structures, fire sections and fire walls. available in rectangular or circular form and require no mechanical or external device to operate as they rely solely on an inter- nal reaction initiated by heat. The...
Protecta FR Putty Cord is an easy to apply fire rated putty supplied as a non-setting cord. Fitting the putty cords will reinstate the fire rating of the partition and prevent the passage of smoke and flames in a fire and sound and air movement during service life. The putty cord is designed to be easily...
Protecta®
FR Board is designed to prevent the spread of fire and smoke through openings in
fire rated walls and floors where openings are formed to allow the installation
of multiple building services. Protecta® FR Board will also maintain the
acoustic design performance in fire rated walls and floors.
...
Protecta® FR Graphite Plate is a preformed self-adhesive intumescent plate, used to reinstate the fire resistance performance of flexible wall constructions when punctured with plastic wall boxes. It is used where the walls have been provided with apertures for the penetration of conduits and cables into ...
Protecta® FR Pipe Wrap is a graphite material, within a flexible plastic sleeve that reacts to heat expanding to fill the void created by the melting plastic through-penetration. It can be used with plastic pipes (PVC-C, PVC-U, PP, PE, PE- HD, ABS and SAN+PVC), bundles of plastic pipes – with or without c...
Protecta Service Transit has been designed to maintain the fire resistance of walls and floors when these are breached by continuous cables and plastic pipes. It is made up of a circular high temperature plastic tube containing a graphite based intumescent lining material which expands upon heating to se...
Protecta FR Collar consists of a split white coated, circular steel casing designed to fit around plastic pipes. The collars have a secure and simple locking device. The steel frame contains a graphite based swelling material that reacts to heat and fills the opening from the melting plastic through-pene...
Create a business listing on the UK's leading security and fire directory
The latest security and fire news, trends and insights
Thanks for using IFSEC Global Directory,
Your enquiry has been sent to the selected companies, they will be in contact shortly.