Protecta FR Board

Protecta® FR Board is designed to prevent the spread of fire and smoke through openings in fire rated walls and floors where openings are formed to allow the installation of multiple building services. Protecta® FR Board will also maintain the acoustic design performance in fire rated walls and floors.

Protecta® FR Board consists of a high density stone wool core, over-coated with Protecta® FR Coating. The top coating provides additional protection by signifi- cantly reducing the permeability of the stone wool core and prevents the pas- sage of hot gases, thus reducing the temperature rise on the unexposed side and reducing heat conduction through the building services. Protecta® FR Board is available with top coating on one or two sides, selected on the basis of installation considerations and fire resistance.

On site, Protecta® FR Board must be used together with Protecta® FR Acrylic for sealing around building services and the surrounding construction.
PROPERTIES & PRECAUTIONS

•  Classified for all types of constructions with or without building service penetr- ations

•   Simple and very quick to install

•   Easy to retrofit additional building services after installation

•  Permanently flexible - will accommodate movements during fire and smaller movements in the construction it has been fitted within

•   Suitable for most surfaces, including concrete, bricks, masonry, steel, wood, gypsum, glass, plastic and most non-porous surfaces

•  May be used in unlimited lengths in walls with heights up to 1200 mm and in floors with widths up to 120 mm.

•   May be installed in gypsum walls without framing around the opening

•   Halogen free with added fungicides

•   Once fully cured, the coated board resists water and frost

•   Protecta® FR Board can be supplied with a smooth surface

•  The fire performance specification of the board has been derived when the seal has been let to cure for a month

•  Precautions are required to be taken to prevent a person stepping onto a blank horizontal penetration seal


View PDF

15
St Andrews Road
HD1 6SB
Huddersfield, West Yorkshire
United Kingdom

See Polyseam Limited at FIREX International 2018

Polyseam Limited will be exhibiting on Stand A125 at FIREX International 2018, 19-21 June, ExCeL, London, UK

Protecta Interior Paint FR-1
Product

Protecta Interior Paint FR-1

Protecta® Interior Paint FR-1 is as easy to use as conventional paints providing a high quality, durable, decorative finish. Ideal for use in communal areas (e.g. public buildings, schools and hospitals) on ceilings and walls as it insulates against heat and prevents the spread of fire, unlike conventional ...

View product page

Protecta EX Mortar
Product

Protecta EX Mortar

Protecta® EX Mortar is a dry white powder consisting of inorganic compounds and perlite.

When mixed with water, the compounds form a highly thermally insulating fi re sealing compound to prevent the spread of fire and smoke through openings in fi re rated walls and floors, including opening...

View product page

Protecta FR Coating
Product

Protecta FR Coating

Protecta® FR Coating spray grade, is an ablative sealant coating designed to enhance, seal and fire protect mineral fibres. It is based on a durable polymer system with inert fillers, non-halogenated fire retardants and a preservative to resist microbial attack. Protecta® FR Coating is designed to be ap...

View product page

Protecta FR Acrylic
Product

Protecta FR Acrylic

Protecta® FR Acrylic has been tested with various types of penetrations through walls, ceilings and floor constructions. Its intumescent property closes any gaps left by burnt away penetrations and will also maintain the acoustic design performance in walls and floors.
Protecta® FR ...

View product page

Protecta FR Graphite
Product

Protecta FR Graphite

Protecta® FR Graphite is a waterbased, fire classified sealing compound which contains a high concentration of heat expanding graphite material. It also has a shelf life of 18 months.

Protecta® FR Graphite is a high specification formulation designed to prevent the spread of fire, smoke and ...

View product page

Protecta FR IPT
Product

Protecta FR IPT

Protecta® FR IPT is a high performance, professional quality, one part ready to use sealant and adhesive. Based on an innovative new Inert Polymer Technology it is suitable for a wide variety of building trade applications including d ecorating, flooring, joinery, plumbing and tiling and out-performs conve...

View product page

Protecta FR Foam
Product

Protecta FR Foam

Protecta® FR Foam is a fire rated construction foam with good acoustic properties. Designed to maintain the fire resistance in walls and floors by filling linear gaps.

Protecta® FR Foam is supplied as a single component polyurethane foam which cures by moisture absorption. It has excellent ...

View product page

Protecta Chemical Fire Damper
Product

Protecta Chemical Fire Damper

Protecta® Fire Dampers are used to fireproof ventilation ducts penetrations in fire cell limiting structures, fire sections and fire walls. available in rectangular or circular form and require no mechanical or external device to operate as they rely solely on an inter- nal reaction initiated by heat. The...

View product page

Protecta FR Putty Pad
Product

Protecta FR Putty Pad

Protecta® FR Putty Pads are an easy to apply fire and sound rated sealant supplied as a non-setting putty. The pad is hand workable, re-useable and re-serviceable due to its non-setting properties. They are supplied in pre-shaped moldable pads which are push-fit self adhesive.

In the event o...

View product page

Protecta FR Graphite Plate
Product

Protecta FR Graphite Plate

Protecta® FR Graphite Plate is a preformed self-adhesive intumescent plate, used to reinstate the fire resistance performance of flexible wall constructions when punctured with plastic wall boxes. It is used where the walls have been provided with apertures for the penetration of conduits and cables into ...

View product page

Protecta FR Pipe Wrap
Product

Protecta FR Pipe Wrap

Protecta® FR Pipe Wrap is a graphite material, within a flexible plastic sleeve that reacts to heat expanding to fill the void created by the melting plastic through-penetration. It can be used with plastic pipes (PVC-C, PVC-U, PP, PE, PE- HD, ABS and SAN+PVC), bundles of plastic pipes – with or without c...

View product page

Protecta FR Cable Transit
Product

Protecta FR Cable Transit

Protecta® FR Cable Transit consists of a PP sleeve in many different sizes with a heat expanding material that seals the cable transit in case of fire. It is friction fitted, casted or fitted together with fire sealing and used in large gaps in combination with Protecta® fire sealing products, the transit...

View product page

Protecta FR Collar
Product

Protecta FR Collar

Protecta® FR Collars consist of a two part, coated,cir- cular steel shell that fits around plastic pipes (PVC-C, PVC-U, PP, PE, PE-HD, ABS and SAN+PVC); plastic pipe bundles – with or without cables, and bundles of cables. The collars have a secure and simple locking device.

The steel shell...

View product page

List your business for free

Create a business listing on the UK's leading security and fire directory

Get the IFSEC Global newsletter

The latest security and fire news, trends and insights