How much overlap is required for the mineral wool fire batt when pattress fitted?
27 Mar 2018
As a result of continuous investment in fire testing to BS EN1366, we have an extended scope of application for the QuelStop Fire Batt. When pattress fitted (face fixed) through flexible plasterboard partitions, it provides in excess of 2-hour fire rating, both integrity and insulation.
As a result of continuous investment in fire testing to BS EN1366, we have an extended scope of application for the QuelStop Fire Batt. When pattress fitted (face fixed) through flexible plasterboard partitions, it provides in excess of 2-hour fire rating, both integrity and insulation.
Some of these pattress fitted fire batt details have been tested and approved with just a 75mm overlap of the aperture, unlike many other fire batts available on the market, that require a bigger overlap. This means less fire batt needed for the same application, which helps saving costs.
The QuelStop Fire Batt is tested and compatible with many of our other products, including QuelCoil Continuous Intuwrap, HPE Intumescent Graphite Sealant, QWR Pipe Collars and QRS Ventilation Ducting Fire Sleeves.
How much overlap is required for the mineral wool fire batt when pattress fitted?
Quelfire Limited
Website
Email Us
T: 0161 924 1342
Springvale Industrial Estate
Millbuck Way
CW11 3HT
Sandbach, Cheshire
United Kingdom
See Quelfire Limited at
Meet Quelfire Limited at stand FI.1237 on the 16-18 May 2023 at the ExCeL London when the co-located IFSEC, FIREX, Facilities Show and Safety & Health Expo events take place!
Product
QuelStop HPE Intumescent Graphite Sealant
QuelStop HPE Intumescent Graphite Sealant is a high expansion intumescent acrylic based graphite sealant used to provide a fire rated linear joint or gap seal and to maintain the fire rating of walls and floors where they have been penetrated by services. It provides up to 4 hour fire rating (EI240). It is...
Product
QuelStop CE Marked Intumescent Acoustic Acrylic Sealant
QuelStop CE Marked Intumescent Acrylic Sealant is a water-based intumescent acrylic used to provide a fire rated linear joint or gap seal and to maintain the fire rating of walls and floors where they have been penetrated by services. It provides up to 4 hour fire rating (EI240). It is suitable: for u...
Product
QuelStop Ablative Coated Mineral Wool Fire Batt
QuelStop Fire Batt is a coated mineral wool board used to reinstate the fire rating of wall and floor constructions where they have been penetrated by services. It provides up to 2 hour fire rating, is suitable for use in flexible walls, rigid walls and floors, as well as for use around cables, cable bunch...
Product
QuelCoil Continuous Intumescent Pipe Wrap
QuelCoil Continuous Intuwrap is used to maintain the fire rating of walls where they have been penetrated by plastic pipes and/or metallic pipes with combustible insulation. It provides up to 2 hour fire rating (EI120). Supplied in a 25m coil and cut to length on site. No mechanical fixings required. Suita...
Product
Fire Protection Compound
Quelfire QF2 Fire Protection Compound is intended for use as a gap filling material where cables, ducts or pipework services penetrate fire compartment floors and walls. QF2 expands slightly on curing (1%), to form a rigid smoke and gas tight seal and is also suitable for use in load bearing situations. Su...
Product
CE Marked Fire Collars / Intumescent Pipe Collars
Quelfire QWR CE Marked Pipe Collars prevent the spread of fire through PVC, HDPE & PP pipes where they penetrate firecompartment walls and floors. They have been tested to BSEN 1366-3: 2009, they are CE Marked and provide up to 4 hour fire rating. They are suitable for PVC, PVC-U, PE, HDPE, M...
Product
CE Marked Vent Duct Fire Sleeves
QRS CE Marked Intumescent Fire Sleeve for Plastic Vent DuctsQuelfire QRS CE Marked Intumescent Vent Duct Fire Sleeves prevent the spread of fire where plastic pipes or plastic ducts penetrate fire compartment walls. They are CE Marked, tested to BSEN 1366-3: 2009 and with Uncapped/Uncapped (U/U) duct confi...
Product
CE Marked Intumescent Pipe Wraps
Quelfire QWW CE Marked Intuwraps prevent the spread of fire through PVC, HDPE & PP pipes where they penetrate fire compartment floors. They are tested to BSEN 1366-3: 2009, are CE Marked and provide up to 4 hour fire rating. They are suitable for PVC, PVC-U, PE, HDPE, MDPE, PP & ABS pipes, are avai...
Product
Intumescent Acoustic Putty Pads
Quelfire Intumescent & Acoustic Putty Pads are designed to maintain fire resistance of plasterboard partitions where plastic or metal electric socket boxes penetrate them. They also make a significant contribution to the reduction of air leakage in properties, helping reduce energy costs and carbon emi...
